Table of Contents
Advertisement
Portable Stand
A portable stand, which is height adjustable, can be purchased separately,
contact Promethean for more information. To fix the ACTIVboard, screw the wall
mounting brackets to the stand at the preferred height position.
Maximum load on the ACTIVboard stands must not exceed 30KG. Read all
instructions before using the stand.
Never attempt to adjust the height of the stand without first removing the
ACTIVboard from the stand.
Always ensure the two upper arm adjustment knobs are tight prior to using
your ACTIVboard.
Software Installation
You must install the software before connecting the ACTIVboard system to your
computer. Instructions on how to install the software are included in the Quick
Start Guide.
Electrical Connections
Instructions on how to connect the ACTIVboard system to your computer are
included in the Quick Start Guide supplied with your installation CD.
Extending the Interface Cable
Serial
The ACTIVboard system is supplied with an 8m serial cable as standard. You
may extend this distance up to a maximum cable length of 20m using the long
cable set, which is available separately from Promethean.
USB
The ACTIVboard system is supplied with a 5m USB cable. This may be extended
up to a maximum of 30m by the use of either multiple active repeater cables, or
multiple USB hubs and passive cables. For example, you can use five 5m active
repeater cables and a 5m passive cable, or five USB hubs and six 5m passive
cables.
7
ACTIVboard User Guide
Advertisement
Table of Contents
