Download Print this page
Hide thumbs Also See for FlexxPump 250 B:

Advertisement

Quick Links

FlexxPump 250/400/500 B
Continuation sheet
I.
Supplementary Sheet for User Manual
I.I
Revision history
This supplementary sheet(s) is/are exclusively valid for
Product:
Product Designation:FlexxPump 250B 400B 500B with external battery compartment
Product Revision:
The chapters described in this supplementary sheet(s) replace the chapters in
User Manual:
Date of creation:
Revision of the User Manual:
for the
Product:
Product Designation:FlexxPump 250B 400B 500B with external battery compartment
Product Revision:
Chapters not replaced by this supplementary sheet(s) in the original user manual remain valid
without exception. Further supplementary sheets to the original instruction manual are valid in
addition to this supplementary sheet.
This document is protected by copyright.
All rights for layout, content, texts and corporate design are reserved by DLS Schmiersysteme
GmbH, © 2022.
All rights, including those of photomechanical reproduction, duplication and distribution
by means of special processes (e.g. data processing, data carriers and data networks),
even in part and/or in extracts, are reserved by DLS Schmiersysteme GmbH.
The content and technical specifications are subject to change without notice.
This supplementary sheet was created in German language, the present language version is a
translation of the German version of the supplementary sheet.
revision: SG-20220623
(FP 250/400/500B with ext. battery compartment)
---
02.2022
0
(FP 250/400/500B with ext. battery compartment)
---
EN-
01

Advertisement

loading

Summary of Contents for DLS FlexxPump 250 B

  • Page 1 Further supplementary sheets to the original instruction manual are valid in addition to this supplementary sheet. This document is protected by copyright. All rights for layout, content, texts and corporate design are reserved by DLS Schmiersysteme GmbH, © 2022. All rights, including those of photomechanical reproduction, duplication and distribution by means of special processes (e.g.
  • Page 2 Two battery holders are also included in the scope of delivery. Depending on requirements, either the DLS Schmiersysteme GmbH battery pack 6V, or your own primary cells or rechargeable batteries in sizes R6 (AA) or R14 (baby cells), each with 1.5V vol- tage, can be used to supply the FP 250/400/500B with ext.
  • Page 3 FlexxPump 250/400/500 B Continuation sheet Fig. 1: Overview FP 250/400/500B with ext. battery compartment Description FlexxPump 250B 400B 500B with external battery compartment(FP 250/400/500B with ext. battery compartment) Action area (for actions with the activation and programming key) Activation and programming key Lubricant outlet, outlets (different versions possible) Retaining ring Upper Housing...
  • Page 4 FlexxPump 250/400/500 B Continuation sheet Technical data Electrics Battery sizes (alkaline or lithium) DLS Schmiersysteme GmbH standard battery pack 6V; 4x R6 with 1.5V or 4x R14 with 1.5V (primary cells or rechargeable batteries) revision: SG-20220623...
  • Page 5 FlexxPump 250/400/500 B Continuation sheet 5.2 Assembly and initial filling 1. Condition as delivered The FP 250/400/500B with ext. battery compart- ment is delivered in a cardboard box. Depending on the version ordered, additional accessories such as a battery pack or lubricant cartridge are included.
  • Page 6 FlexxPump 250/400/500 B Continuation sheet 3. Remove the housing from the power unit of the FP 250/400/500B with ext. battery compart- ment.  Turn the retaining ring counterclockwise in or- der to remove the upper housing from the power unit. ...
  • Page 7 FlexxPump 250/400/500 B Continuation sheet 4. Mounting the lubricant cartridge  Place the filled lubricant cartridge on the FP 250/400/500B with ext. battery compartment with the label facing forwards.  Turn the lubricant cartridge clockwise onto the FP 250/400/500B with ext. battery compartment. ...
  • Page 8 FlexxPump 250/400/500 B Continuation sheet 6. Loosen the screws and remove the cover to open the battery compartment.  Turn the four screws counterclockwise.  Once the screws are loosened, the cover can be remo- ved.  Remove the cover from the battery compart- ment.
  • Page 9 FlexxPump 250/400/500 B Continuation sheet 7.2 Changing cartridge and battery NOTICE A lubricant cartridge that has been used must not be put back on the FP 250/400/500B with ext. battery compartment, as the integrated cycle counter of the FP 250/400/500B with ext. battery compartment is auto- matically reset after a cartridge has been removed. § Only use fully filled lubricant cartridges. NOTICE Only use original lubricant cartridges with lubricant approved by the manufacturer. § Observe the maximum storability of the lubricant filled in cartridges. NOTICE  It is not possible to refill empty or opened lubricant cartridges. NOTICE  Make sure that you use the same lubricant in the new cartridge which is already in use. §...
  • Page 10 FlexxPump 250/400/500 B Continuation sheet 1. Remove the housing from the power unit of the FP 250/400/500B with ext. battery com- partment.  Turn the retaining ring counterclockwise in or- der to remove the upper housing from the power unit. ...
  • Page 11 FlexxPump 250/400/500 B Continuation sheet 4. Mounting the lubricant cartridge  Place the filled lubricant cartridge on the FP 250/400/500B with ext. battery compartment with the label facing forwards.  Turn the lubricant cartridge clockwise onto the FP 250/400/500B with ext. battery compartment. ...
  • Page 12 FlexxPump 250/400/500 B Continuation sheet The battery can be changed during normal operation of the FP 250/400/500B with ext. battery compartment. FP 250/400/500B with external battery compartment shows Error E3; the red LED flashes every 5 seconds. In the following steps is described how you change the battery. 1.
  • Page 13 FlexxPump 250/400/500 B Continuation sheet 3. Inserting the battery packs  Connect the new battery to the battery cable via the reverse polarity protected plug or insert new batteries into the matching battery holder and connect it to the reverse polarity protected plug. ...
  • Page 14 FlexxPump 250/400/500 B Continuation sheet Appendix Dimension sheet and installation dimension revision: SG-20220623...
  • Page 15 FlexxPump 250/400/500 B Continuation sheet Appendix Dimension sheet and installation dimension revision: SG-20220623...

This manual is also suitable for:

Flexxpump 400 bFlexxpump 500 b