Table of Contents
Advertisement
e Complete the profile configuration with OK and activate the new profile
f
g Now close the AirLancer Client Manager.
4.3
Overview of the functions
4.3.1
Administration of profiles
•
•
4.3.2
Configuration
You can configure installed profiles in the AirLancer Client Manager under
Profile Management and activate them with the command Activate.
•
•
4.3.3
Analysis, diagnosis and information
The page Link Status of your AirLancer Client Manager lists information
about the status of the Wireless LAN and the your own radio LAN interface,
by clicking on the profile and then Activate.
Check your country settings in the menu Action under Country Select .
Please notice that for a legal operation of your AirLancer radio card a cor-
rect country setting is mandatory, since the regulations for operating a
radio network may differ in different countries. Pay also attention to
chapter 'Radio channels' on page 42 and the specific regulations for ope-
rating with radio networks in different countries!
Installing profiles
Changing to another profile
For ad-hoc networks you have to enter network name, radio channel and
WEP key.
Ad-hoc networks are only possible in the 2,4 GHz frequency band using
IEEE 802.11g and IEEE 802.11b. Ad-hoc networks are not available with
IEEE 802.11a in the 5 GHz band.
When using base stations you can scan (open) Wireless LANs within
reach. The available radio networks within reach are listed on the regi-
ster card Profile Management under Available Networks. You can
easily select the desired one by cklicking on and activating it via Acti-
vate.
|
The AirLancer Client Manager
27
|
|
AirLancer
Advertisement
Table of Contents
