Page 1
All manuals and user guides at all-guides.com Wing Span:73.2in/1860mm; Radio:4Channel 5Servos; Wing Area:62sq.dm; Engine:20CC Gas Length:61in/1550mm; CAUTION : this plane is not a toy and should be kept away children under 16 years of age! Before use , please carefully read this manual.
All the parts together All manuals and user guides at all-guides.com Main Wings Connect the aileron and the main wing by hinges.Be sure to apply instant type glue to both sides of each hinges. Install the aileron horns in place with AB glue Align the holes in the horns...
Page 3
Cut the servo holes on the bottom of the main wings All manuals and user guides at all-guides.com Gather servo parts as shown. Install the control horn.
Page 4
Use screw to fixed it All manuals and user guides at all-guides.com Install the servo.as shown Drill holes with the specified diameter(13mm) on the bottom wing...
Page 5
Servo extension through the hole All manuals and user guides at all-guides.com Put the servo into the hole then use screw fixed it Connect the servo arm and control horn with push rod .
Page 6
Connect the main wings and the fuselage with hard wood. All manuals and user guides at all-guides.com Main Landing Gear and Tail Wheel Unit Cut hole at the Original design hole of the fuselage Fix up main landing gear on the fuselage bottom with screws.
Page 7
Use screw to connect the landing gear, wheel pant, nut and wheel All manuals and user guides at all-guides.com in turn, and finally use a lock nut to lock them. Finished photo Drill holes with the specified diameter(2mm) Stabilizer And Rudder...
Page 8
Use screw to lock tail landing gear on the wing bottom All manuals and user guides at all-guides.com Stabilizer And Rudder Apply epoxy into hinge hole of the elevator Connect the vertical fin and the rudder by hinges.
Page 9
Cut off shaded portion on the fuselage. All manuals and user guides at all-guides.com Cut the holes on the stabilizer Install the elevator and vertail fin, as shown...
Page 10
Install the elevator horns and fix it with screws. All manuals and user guides at all-guides.com Finished photo Install rudder horns and push-rod.
Page 11
Assemble the elevator servos in the fuselage All manuals and user guides at all-guides.com Install the rudder servo and fix it with screws. Install throttle servo and push-rod...
Page 12
Screwed to the wing.As shown. All manuals and user guides at all-guides.com Trim fit the canopy Use screw to lock it...
Page 13
Drill a hole use for install adjustable engine mounts All manuals and user guides at all-guides.com Fixed with nuts Finished photo...
Page 14
Install the engine.as shown All manuals and user guides at all-guides.com Mount the fuel tank into the fuselage CG POSITION & CONTROL THROWS...
Page 15
All manuals and user guides at all-guides.com THE FINISHED PHOTO...
Page 16
All manuals and user guides at all-guides.com...
Page 17
All manuals and user guides at all-guides.com...
Page 18
All manuals and user guides at all-guides.com...
Page 19
All manuals and user guides at all-guides.com...
Page 20
All manuals and user guides at all-guides.com...
Page 21
All manuals and user guides at all-guides.com...
Page 22
All manuals and user guides at all-guides.com...
Page 23
All manuals and user guides at all-guides.com...
Page 24
All manuals and user guides at all-guides.com...
Page 25
All manuals and user guides at all-guides.com...
Page 26
All manuals and user guides at all-guides.com...
Page 27
All manuals and user guides at all-guides.com...
Page 28
All manuals and user guides at all-guides.com...
Page 29
All manuals and user guides at all-guides.com...
Page 30
All manuals and user guides at all-guides.com...
Page 31
All manuals and user guides at all-guides.com...
Page 32
All manuals and user guides at all-guides.com...
Need help?
Do you have a question about the Falcon Trainer and is the answer not in the manual?
Questions and answers