Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hobby King Tanager Glider
Summary of Contents for Hobby King Tanager Glider
- Page 1 Tanager Glider OWNER’S MANUAL...
- Page 2 Introduction Thank you for purchasing the HobbyKing Tanager Glider. The Tanager glider can be used for slope soaring, flat-land thermalling, aerobatics and more. A built-in motor mount can be used for quick conversion to powered flight if you don’t have easy access to rising air.
- Page 3 Glue - Gorilla Glue (Polyurethane glue) - 5-30 minue epoxy - CA glue Accessoriesneeded for powered version - 1 battery(2s 800 mah Lipo battery) - 22-05 brushless motor(KV 1200~1600) - 1 folding prpeller(7*4 or 7*5) and spinner Assembly Instructions(Glider) 1. Remove the extra cover from the wing.Then bond the fin and the fuselage with Gorilla Glue...
- Page 4 Adjust length of the linkagesto bring the aileron and drooperon to their neutral positions (0 or level flight). Typical pitch inputs should only be +/- 15 degrees, and roll deflections of +/- 30/15(Up/Down) degrees. 2. Electric version only Connect the BEC to the the motor, check the rotation direction of the power, then install the folding propeller.
- Page 5 Connect the receiver and check all the system. Install the jig for nose cutting...
- Page 6 3. Final assembly and radio setup Install the battery and connect the receiver, check the radio and check theCenter of Gravity (CG). The CG should be approximately 76 mm from the...
- Page 7 leading edge, which is also the forward-most point of the center-rib. Advanced flyers may want the CG another 5mm aft of this point. Warning A radio-controlled model is not a toy. It is capable of causing serious bodily injury and property damage. It is the buyer’s responsibility to build this kit correctly and to properly install the motor, radio, and all other equipment.
Need help?
Do you have a question about the Tanager Glider and is the answer not in the manual?
Questions and answers