Lubrication Points And Type Of Lubricant - Hitachi CG 25EUAP (L) Service Manual

Lubrication points and type of lubricant

Apply specified grease to the following parts.
Grease
Multemp PS No. 2
Molub-Alloy 777-1
Multemp PS No. 2
• Oil Seal [60]
Molub-Alloy 777-1
• Shaft and spline of the Drive Shaft [230]
• Sliding sections of the Pivot Rocker Arm [30] and Rocker Arm [34]
4-cycle oil
• Shafts of the Exhaust Valve [41] and Intake Valve [40]
• Circumference of the 1st Ring [48], 2nd Ring [49], and Oil Ring [50]
• Sliding sections of the Pivot Rocker Arm [30] and Rocker Arm [34]
• Engaging surfaces of the Retainer Valve [12], Exhaust Valve [41], and Intake Valve [40]
• Tappet [32]
Registered part name
Hitachi Power Tool Grease No. 2 (30 g)
Grease (PS No. 2) (2.5 kg)
Grease (Molub-Alloy No. 777-1) 75 g
Net weight
30 g
2.5 kg
75 g
-21-
Code No.
939301
939536
325149