Hitachi CG 25EUAP (L) Service Manual page 20

11. Mounting the handle
(1) Model CG 25EUAP
• Position Handle Holder (B) [188] so that the distance between the engine side end of the Main Pipe
[229] and the engine side end of Handle Holder (B) [188] is 400 mm. Then secure Handle Holder (C)
[190] by tightening the two Bolts M6 x 25 [191] evenly. At this time, mount the Handle Holder Rubber
[189] to the Main Pipe [229] with double-face adhesive tape.
• Holding the Bike Handle [175] with Handle Holder (A) [174], tighten the four Bolts M5 x 25 [173]
evenly.
• Mounting the handle (1)
Model CG 25EUAP
[161]
[163]
[162]
[168]
[164]
[165]
[230]
[229]
[166]
[170]
[169]
[171]
[173]
[174]
[188]
[189]
[190]
[191]
-19-
[167]
[172]
[175]
255
400