Hitachi CG 25EUAP (L) Service Manual page 12

3. Cleaner, carburetor and insulator
(1) Disassembly
Loosen the Cover Fixing Bolt [82], and then remove the Cleaner Cover [81] and Cleaner Element [80].
Loosen two Screws M5 x 68 [76], and then remove the Cleaner Body [72], Carburetor [26], and other
parts. Loosen the Bolt M5 x 30 [22], and then remove the Insulator [21] and other parts.
(2) Reassembly
Mount the removed parts in the order shown in the figure below. Before mounting the Cleaner Element
[80] in the Cleaner Cover [81], wash the Cleaner Element [80] with gasoline, and then dry it well.
• Cleaner, carburetor and insulator
[20]
[19]
[72]
[21]
[22]
[76]
[80]
[81]
-11-
[23]
[24]
[25]
[26]
[74]
[75]
[76]
[82]