CDA SC210 Series Manual For Installation, Use And Maintenance page 37

Replacing the Middle and Inner Panes of Glass
1. Make sure the door is locked open (see fig. 38).
2. Replace the middle pane:
– Check that the four rubber pads are in place (M in fig. 44).
– Check that you are holding the pane the correct way. You
should be able to read the wording on it as it faces you.
– Gently insert the top edge of the pane into the top clamps
(arrow 1 in fig. 45), then lower the pane and insert the
bottom edge into the bottom clamps (arrow 2 in fig. 45);
and then slide the pane into position (fig. 46).
M M
Fig. 44
1
1
Fig. 45
Fig. 46
37
2