CDA SC210 Series Manual For Installation, Use And Maintenance page 34

34
Replacing the Inner Pane of Glass
1. Make sure the door is locked open (see fig. 27).
2. Replace the inner pane:
– Check that the four rubber pads are in place (D in Fig. 30).
– Models SV100.. and SV150.. only: Check that you are
holding the pane the correct way. You should be able to read
the wording on it as it faces you.
– Insert the pane in the left E and right F slide guides (fig. 31),
and gently slide it to the retainers H (fig. 32).
– Reassemble the seal G in the correct way (fig. 33) by hooking
the no. 3 fixing hooks in the proper holes (fig. 34).
– Unlock the oven door by opening it completely and closing
the lever A on the left and right hinges (Fig. 35).
Fig. 32
The oven door
has a sealed
gasket in the
top part.
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling
air circulation.
Fig. 30
E
E
Fig. 31
H
H
H
Fig. 34
Fig. 35
D
F
F
G G
Fig. 33
A
A