Summary of Contents for turck EZ-track Q21 Series LDT
Page 1
Your Global Automation Partner EZ-track® Q21 Series LDT Manual...
Page 2
If your application does not require FM Class 1, Division 2 approval, wire the Q21 using a standard 4 pin eurofast® cordset from Turck. Turck Inc. | 3000 Campus Drive, Minneapolis, MN 55441 | T +1 800 544 7769 | F +1 763 553 0708 | www.turck.com...
Page 3
Accessories Input Voltage 10-30 VDC Current Draw Voltage Units Current Units 80 mA max. @ 10 VDC 90 mA max. @ 10 VDC Item Part Number 35 mA max. @ 30 VDC 55 mA max. @ 30 VDC Slide Magnet SM-Q21 Output 0 to 10 V...
Page 4
D. ZERO = 0 V on 0 to 10 VDC units, -10 V on -10 to 10 VDC units, and 4 mA on 4 to 20 mA units Turck Inc. | 3000 Campus Drive, Minneapolis, MN 55441 | T +1 800 544 7769 | F +1 763 553 0708 | www.turck.com...
Page 5
Functional Overview (continued) LED Colors Green: Magnet is present and within the active programmed range. Red: Fault; The LDT has lost its signal from the magnet or the magnet has moved into the Null or Dead Band. Yellow: The magnet is out of the programmed ZERO to SPAN range, but still within the active stroke area. Wiring Diagrams Q21 Wiring Connections Once the LDT has been installed, wiring connections can be made.
Page 6
(RK 4.4T-4/S618). If space is a consideration a right angle connector is also avail- able, (WK 4.4T-2/S618 or WK 4.4T-4/S618). Turck Inc. | 3000 Campus Drive, Minneapolis, MN 55441 | T +1 800 544 7769 | F +1 763 553 0708 | www.turck.com...
Page 7
FM Approved Linear Displacement Transducers Installation in Class 1, DIvision 2 LT..-Q21-..-H1141 Linear Displacement Transducer CIRCUIT IS LIVE Drawing No.: 3000 Campus Drive NI-1.003 Plymouth, MN 55441 Phone: (763) 553-7300 LT..-Q21-..-H1141 Linear Displacement Transducers Title: Installation in Class I, Division 2 Hazardous Locations Release 5/7/04 NONE...
Need help?
Do you have a question about the EZ-track Q21 Series LDT and is the answer not in the manual?
Questions and answers