Attaching And Removing The Ridger - Stihl AHK 800.0 Instruction Manual

7 Attaching and Removing the Ridger

7 Attaching and Removing
the Ridger
7.1 Attaching the Ridger
WARNING
■ The tiller may tip over or move when attaching
the ridger. This may result in injury to people
and damage to property.
► Always work in pairs when attaching the
ridger.
► Stop the engine.
► Place the tiller on a level surface.
► Have a second person lift and hold tiller (1) so
blade spur (2) can be removed.
► Loosen screws (3).
► Detach retaining pin (4) and remove pin (5).
Blade spur (2) can be removed.
0478-906-9911-B
► Insert ridger (6) into adapter (7) from below so
the bores align.
► Insert pin (5).
► Push retaining pin (4) through the bore in
pin (5).
The ridger is secured.
7.2 Removing the Ridger
WARNING
■ The tiller may tip over or move when removing
the ridger. This may result in injury to people
and damage to property.
► Always work in pairs when removing the
ridger.
► Stop the engine.
► Place the tiller on a level surface.
► Have a second person lift and hold tiller (1) so
ridger (2) can be removed.
► Loosen screws (3).
English
13