Page 1
We want to help you get the best result from your PayMatic 4B - Xerox MFP. This manual contains information on how to do that; please read it carefully. Due to continuous product improvements this manual is subject to changes without notice.
Page 2
PayMatic 4B - Xerox MFP - Install Manual | EN All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher.
PayMatic 4B - Xerox MFP Table of Contents Introduction Configuration Accounting Mode ..........................................4 Auxiliary Device Type ..........................................5 Service Access & Accounting ..........................................5 Other ..........................................6 Log Out ..........................................7...
Page 4
Due to continuous prduct imporovements this manual is subject to change without notice. This document describes the technical and functional operation of the PayMatic 4B - Xerox MFP. Greatest care has been taken drafting the information in this manual and it may be said thatit is reliable. However, the producer is not liable for any shortcomings in the text or incompleteness of the information.
Page 6
Introduction This manual is meant to help you to configure the PayMatic 4B and Xerox MFP to work with each other. Xerox MFP Configuration for Inepro PayMatic 4B When the FDI (Foreign device Interface) is installed on the MFP (Multi Functional Printer) and the PayMatic is connected, login as administrator (= factory default login) at the device touch screen.
Set Auxiliary Device Type to Card Activated Service Access & Accounting At Service Access & Accounting make sure all services are selected to restrict and Copy is selected at services you want to track usage Page 5 of 12 PayMatic 4B - Xerox MFP | EN...
Configuration Other Other Set Job Timeout to "1" second. Set Double Count Large Impressions to Count Once. Page 6 of 12 PayMatic 4B - Xerox MFP | EN...
Press Save Log Out Press the "Log in / Log out" button in the upper right corner of the Xerox console panel again. Select "Logout" to logout as administrator. Page 7 of 12 PayMatic 4B - Xerox MFP | EN...
Page 12
Configuration Log Out The default screen should now be the following: Page 8 of 12 PayMatic 4B - Xerox MFP | EN...