Table of Contents
Advertisement
5 Planning the installation
Use of type-1 AC surge protection devices
5.8
Use of type-1 AC surge protection de-
vices
Related topics
"9.3 Install type-1 AC surge protection device", page 90
The inverter is pre-equipped for the use of type-1 AC surge pro-
tection devices.
The accessories required for connection are included in the
scope of delivery. The type-1 AC surge protection devices them-
selves arenot included in the scope of delivery.
The type-1 AC surge protection devices are designed for mount-
ing on a DIN rail (always included in delivery).
Fig. 5.19:
Dimension restrictions for type-1 AC surge protection devices
48
Observe the restrictions regarding the dimensions
of the type-1 AC surge protection devices! The
dimensions specified inFig. 5.19, p. 48 must
not be exceeded!
For example, a Phoenix Contact type-1/2 surge
protection device (order no.: 2905988) would be
suitable.
Installation and Operation Manual M125HV EU V3 EN 2021-07-12
Advertisement
Table of Contents
