Trouble Shooting - FLORABEST FRT 550 A1 Translation Of Original Operation Manual

GB IE NI

Trouble shooting

Problem
Trimmer vibrates
Trimmer does not start
Poor cutting performance
112
Possible cause
Line spool is dirty
Line spool is defective
No mains power
ON / OFF switch (2)
defective
Worn carbon brushes
Motor defective
Line spool does not have
sufficient line
Line has not been
conducted out of the
spool or only on one side
Remedy
Clean spool
(see "Cleaning and
maintenance")
Exchange spool
(see "Cleaning and
maintenance")
Check cable, line, plug; repair
by qualified electrician
Repair by After-Sales Service
Lengthen cutting line
(see "Trimmer settings") or
exchange spool (see "Cleaning
and maintenance")
Remove spool and lace line
through line outlet eyelets and
return spool.