Use Timers; Lock Unsuitable Content - Philips 32PFL5206H/12 Manual

Note
•
To disable the clock, repeat the procedure.
Change the clock mode
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Auto clock].
3
Select [Automatic] or [Manual], then press
OK.
Change the time zone
Note
•
This option is only available if you select [Auto clock] >
[Automatic] (in countries with clock transmission data).
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Time zone].
3
Select your time zone.
4
Press OK to confirm.
Use daylight saving
Note
•
This option is only available if you select [Auto clock
mode] > [Manual].
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Daylight
saving], then press OK.
3
Select [Standard time] or [Daylight saving
time], then press OK.
EN
20

Use timers

You can set timers to switch the TV to standby
at a specified time.
Tip
•
Set the TV clock before you use timers.
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-defined duration.
Tip
•
You can switch off your TV earlier or reset the sleep
timer during the countdown.
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Sleep timer].
The [Sleep timer] menu appears.
»
3
Select a value between zero and 180
minutes.
If you select zero, the sleep timer
»
switches off.
4
Press OK to switch on the sleep timer.
The TV switches to standby after the
»
specified time.

Lock unsuitable content

You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
Set or change code
1
Press .