Set Locks And Timers - Philips 42PFL76 6M Series User Manual

Subpages
A teletext page can contain several
subpages. These subpages are shown on a
bar next to the main page number.
If subpages are available on a teletext page,
press or to select them.
Search
1. When you view teletext, press OK to
highlight the first word or number.
2. Press the Navigation buttons to skip to
the word or number to search.
3. Press OK to begin the search.
4. Press until no word or number is
highlighted to exit the search.
Digital teletext
Some digital TV broadcasters offer dedicated
digital text or interactive services on their
digital TV channels, for example, BBC1.
When in digital teletext:
Press the Navigation buttons to select
•
or highlight items.
• Press the Colour buttons to select an
option, then press OK to confirm or
activate.
Note: Digital text services are blocked when
subtitles are broadcast and enabled on the
TV. Read Use more of your TV > View
subtitles (Page 32).
Teletext 2.5
Teletext 2.5 offers more colours and better
graphics than normal teletext. If Teletext 2.5
is broadcast by a channel, it is switched on
by default.
To switch Teletext 2.5 on or off
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Text 2.5] > [On] or [Off], then
press OK.

Set locks and timers

Clock
You can display a clock on the TV screen.
The clock displays the time that is broadcast
by your TV service operator.
Display the TV clock
1. While you watch TV, press
2. Select [Status], then press OK.
The clock is displayed on the lower right
hand corner of the TV screen.
Change the clock mode
The clock mode is automatically
synchronised to the Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
[Manual].
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Clock] > [Auto clock mode].
4. Select [Automatic], [Manual] or [Country
dependent], then press OK.
Enable or disable daylight saving
If clock mode is set to [Country
dependent], you can enable or disable
daylight saving for your time zone.
1. In the [Clock] menu, select [Daylight
saving] > [Daylight saving time] or
[Standard time], then press OK. Daylight
saving is enabled or disabled.
Set the clock manually
If clock mode is set to [Manual], set the date
and time manually.
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Use the Navigation buttons to make your
selection.
3. Select [Done], then press OK.
Sleeptimer
Sleeptimer switches the TV to standby after
a specified time. You can switch off your TV
earlier or reset the sleeptimer during the
countdown.
OPTIONS.
EN 31