Rename Channels; Rearrange Channels; Test Digital Reception - Philips 32PFL5206H/12 Manual

• If you know the three-digit frequency
of the channel, enter it.
• To search, select [Search], then press
OK.
3
When the channel is found, select [Done],
then press OK.
• To store the channel as a new number,
select [Store as new channel], then
press OK.
• To store the channel as the previously
selected channel, select [Store
current channel], then press OK.
Step 3: Fine-tune analogue channels
1
Press .
2
Select [Setup] > [Channel settings]
> [Channel installation] > [Analogue:
manual install] > [Fine-tune], then press
OK.
3
Press to fine-tune the channel.

Rename channels

You can rename channels. The name appears
when you select the channel.
1
While you watch TV, press FIND.
The channel matrix menu is displayed.
»
2
Select the channel to rename.
3
OPTIONS.
Press
» The channel options menu is displayed.
4
Select [Rename channel], then press OK.
5
To display the text input box, press OK.
6
For each character, select a character, then
press OK.
• To select uppercase letters, lowercase
letters or symbols: In the row below
the space key, select the respective
key, then press OK.
7
When complete, select [Done], then press
OK.
» The text input box closes.
8
In the rename channel menu, select
[Done], then press OK.

Rearrange channels

After you install channels, you can rearrange the
order in which they appear.
1
While you watch TV, press FIND.
The channel matrix menu is displayed.
»
2
OPTIONS.
Press
» The channel options menu appears.
3
Select [Reorder], then press OK.
4
Select the channel to rearrange, then press
OK.
The selected channel is highlighted.
»
5
Move the highlighted channel to its new
location, then press OK.
6
OPTIONS.
Press
7
Select [Done reordering], then press OK.

Test digital reception

You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1
Press .
2
Select [Setup] > [Channel settings]
> [Channel installation] > [Digital:
Reception test] , then press OK.
3
Enter the frequency to test, then press OK.
4
Select [Search], then press OK.
5
When the channel is found, select [Store],
then press OK.
Note
•
If the signal quality and strength is poor, reposition the
aerial or satellite dish and retest.
•
If you still have problems with the reception of your
digital broadcast, contact a specialised installer.
EN
27