[Brightness]: Adjust the intensity and
•
details of dark areas.
•
[Colour]: Adjust colour saturation.
[Hue]: For NTSC, compensate for colour
•
variations.
[Sharpness]: Adjust sharpness in the image.
•
[Noise reduction]: Filter and reduce noise
•
in an image.
•
[Tint]: Adjust the colour balance in an
image.
[Custom tint]: Customise tint setting (Only
•
available if [Tint] > [Custom] is selected).
[Digital Crystal Clear]: Fine-tune each
•
pixel to match surrounding pixels. This
setting produces a brilliant, high-definition
image.
[Advance sharpness]: Enable superior
•
picture sharpness.
•
[Dynamic contrast]: Enhance contrast.
[Medium] setting is recommended.
[Dynamic backlight]: Adjust brightness
•
of the TV backlight to match lighting
conditions.
[MPEG artifact reduction]: Smooth
•
out transitions on digital pictures. You
can switch this feature on or off.
[Colour enhancement]: Make colours
•
more vivid and improve the details
in bright colours. You can switch this
feature on or off.
•
[Gamma]: Adjust the midtone
intensity in the picture. Black and
white are not affected.
[PC mode]: Adjust the picture when a PC
•
is connected to the TV via HDMI or DVI.
•
[Picture format]: Change the picture
format.
[Screen edges]: Adjust the viewing area
•
(when set to minimum, you may see noise
or the rough edges of an image).
[Picture shift]: If available, adjust the picture
•
position for all picture formats except for
[Auto zoom], [Wide screen], [4:3] and
[Unscaled].
Change picture format
1
Press ADJUST.
2
Select [Picture format], then press OK.
3
Select a picture format, then press OK.
Summary of picture formats
The following picture settings can be configured.
Note
•
Depending on the format of the picture source, some
picture settings are not available.
EN
15