Use A Kensington Lock - Philips 32PFL5206H/12 Manual

5
Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink].
6
Select [On], then press OK.
7
Select [TV speakers], then press OK.
8
Select one of the following, then press OK.
[Off]: Switch off TV speakers.
•
[On]: Switch on TV speakers.
•
• [EasyLink]: Stream TV audio through
the connected HDMI-CEC device.
Switch the TV audio to the connected
HDMI-CEC audio device through the
adjust menu.
[EasyLink autostart]: Turn off TV
•
speakers automatically and streams TV
audio to the connected HDMI-CEC
audio device.
Note
•
To mute the TV speakers, select [TV speakers] > [Off].
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are
selected, access the adjust menu to switch the
TV audio.
1
While you watch TV, press ADJUST.
2
Select [Speaker], then press OK.
3
Select one of the following, then press OK:
• [TV]: On by default. Stream TV audio
through TV and the connected HDMI-
CEC audio device until the connected
device switches to system audio
control. TV audio is then streamed
through the connected device.
• [Amplifier]: Stream audio through
the connected HDMI-CEC device. If
system audio mode is not enabled on
the device, audio continue to stream
from the TV speakers. If [EasyLink
autostart] was enabled, the TV
prompts the connected device to
switch to system audio mode.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
switch on Pixel Plus Link.
1
Connect an HDMI-CEC compliant device
to the HDMI connector.
2
Configure the HDMI-CEC compliant
device properly (see the device user
manual).
3
Press .
4
Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink].
5
Select [On], then press OK.
6
Select [Pixel Plus Link] > [On], then press
OK.

Use a Kensington lock

There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
EN