Operation; Watch The Connected Video Source; Change Picture Format; Play Multimedia Files Via Local Area Network - Philips SignageSolutions 55BDL3102H User Manual

4.

Operation

NOTE: T he control button described in this section is mainly on the
remote control unless specified otherwise.
4.1.

Watch the Connected Video Source

See page 10 for external equipments connection.
1. Press [ ] SOURCE button.
2. Press [ ] or [ ] button to choose a device, then press [
button.
4.2.

Change Picture Format

You can change the picture format to suit the video source. Each video
source has its available picture formats.
The available picture formats depend on the video source:
1. Press [ ] FORMAT button.
2. Press [ ] or [ ] button to choose a picture format, then press
[ ] button.
• {Auto zoom}: Enlarge the picture to fill the screen.
Recommended for minimal screen distortion but not for HD or
PC.
• {Movie expand 16:9}: Scale 4:3 format to 16:9. Not
recommended for HD or PC.
• {Wide screen}: Shows wide screen format content unstretched.
Not recommended for HD or PC.
• {Unscaled}: Provide maximum detail for PC. Only available
when PC mode is selected in the {Picture} menu.
• {4:3}: Display the classic 4:3 format.
• {Custom Zoom}: Choose to apply customize zoom settings in
the Picture and edges submenu.
4.3. Play multimedia files via Local Area
Network
To play files via Local Area Network, you will need:
• A wired home network, connected with a Universal Plug and Play
(uPnP) router.
• Optional: A LAN cable that connects your display to your home
network.
• A media server running on your computer.
• Appropriate settings on your computer firewall to allow you to run
the media server.

4.3.1. Set up the network

1. Connect your display and the computer to the same home network.
See illustration below to connect your display to a network.
2. Switch on your computer and the router.
• Single display setup:
ROUTER
[RJ-45]
PC
• Multiple display setup:
]
[RJ-45]
ROUTER
[RJ-45]
PC
NOTE: I f the apparatus does not return to DLNA mode due to
external electrical disturbances (e.g. electrostatic discharge), user
intervention is required.
Set up media sharing
1. Install a media server on your computer to share media files. These
are some media servers:
• For PC: Windows Media Player 11 (or higher) or TVersity
• For Mac: Twonky
2. Switch on media sharing on your computer using the media server.
For more information on how to set up the media server, refer to
the website of the media server.

4.3.2. How to use DLNA-DMP

Ensure you have connected to the network.
You can press button to display the connection of the network.
HDMI 1 1080p60
Picture format
Picture style
Sound style
Smart power
Volume
Monitor group
Monitor ID
Model name
SWVersion
Serial no
Temperature
Cooling fan
Network configuration
IP address
Netmask
Gateway
Network name
Ethernet MAC address
Play files from display
1. Press [ ] SOURCE button, choose Network, and press [
] button.
2. Now, you can see all the PC's connected to the same router on the
screen. Choose the right one.
3. Press [ ] and [ ] to choose the directory and files to play.
4. You can connect up to 4 displays to the same PC and play same
media stream.
15
55BDL3102H
DISPLAY 1
[RJ-45] [RJ-45]
14/05/2018 Friday 09:32:00
Wide screen
Standard
Original
Off
20
1
1
55BDL3102H
1.05
33°C
0 RPM
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
55BDL3102H
00:24:67:33:50:43
USB
Network
Internet
SmartCMS
CVBS
YPbPr
VGA
HDMI 1
HDMI 2
DVI-D
Display Port
Card OPS
DISPLAY 2