Introduction; Device Description; Scope Of Delivery - Scheppach HP1400S Manual

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We wish you much pleasure and success with your
new machine.
Note:
In accordance with valid product liability laws, the
manufacturer of this device shall not be responsi-
ble for damage to and from this device which results
from:
• Improper care
• Non-compliance with the Operating Instructions
• Repairs made by unauthorized persons
• The installation and use of any parts which are not
original spare parts
• Improper use and application
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important infor-
mation on how to operate the machine safely, pro-
fessionally and economically, how to avoid danger,
costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con-
cerning the operation of the machine and who are in-
formed about the associated dangers. The minimum
age requirement must be complied with.
In addition to the safety notices contained in this
operating manual and the particular instructions for
your country, the generally recognised technical reg-
ulations for the operation of identical devices must
be complied with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
20 | GB
2. Device description (Fig. 1)
1. Vibratory plate
2. Eccentric
3. Drive
4. Motor
5. Gasoline tank
6. Air filter
7. Exhaust pipe
8. Lower handle
9. Upper handle
10. Gas lever
11. Carburettor exhaust *Depending on the version

3. Scope of delivery

A Vibratory plate with motor
B Handle
C Wheel base
D Rubber mat with fastening bar
Small parts
Operating instructions
General notes
• After unpacking, check all parts for any transport
damage. Inform the transport agent immediately of
any faults. Later complaints cannot be considered.
• Make sure the delivery is complete.
• Before putting into operation, familiarize yourself
with the machine by carefully reading these in-
structions.
• Use only original accessories, wearing or replace-
ment parts. You can find replacement parts at your
dealer.
• When ordering, include our order numbers and the
type and year of construction of the machine.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
www.scheppach.com