Advertisement
2. INTRODUCTION & SPECIFICATIONS
COMMON TO MODELS SDE600
COMPONENT LIST Figure 1.
3.
INSTRUCTIONS FOR USE
3.1.
PREPARING DRILL FOR USE.
F
WARNING! Unplug from the mains power supply before proceeding.
p
3.2.
OPERATING THE DRILL
Drill without hammer action.
Drill with hammer action.
Hammer action only (For use with a chisel)
fig 4
3.3.
CONVENTIONAL DRILL CHUCK
F
WARNING! Unplug from the mains power supply before assembling chuck.
p
F
WARNING! ensure you remove the chuck key before starting the drill.
I
CAUTION! To avoid overloading the motor. When using the chuck in the hammer mode, DO NOT apply a too heavy pressure.
DO NOT USE CHISELS OR ‘HAMMER’ MODE ONLY when using the conventional chuck, as chuck will be damaged.
s
fig 1
Items
not illustrated.
fig 5
fig 2
fig 6
fig 3
fig 7
Advertisement
