Table of Contents
Advertisement
3
For Windows XP Operating Systems
•
Click
> Settings > Control Panel
> Network Connections.
•
Double-click
Local Area Connection.
•
In the General tab, click Properties.
•
In the IP address field, enter
192.168.1.2.
•
In the Subnet mask field, enter
255.255.255.0.
•
Leave the Default gateway and
DNS settings fields empty.
•
Click OK and close the
dialog boxes.
For Windows Vista Operating System
•
Click
> Control Panel
> Network and Internet
> Network and Sharing Center
> Manage network connections.
•
Right-click Local Area Connection,
and then click Properties. If you
are prompted for an administrator
password or confirmation, type the
password or provide confirmation.
•
Click the Networking tab.
Under This connection uses the
following items, click Internet
Protocol Version 4 (TCP/IPv4),
and then click Properties.
•
In the IP address field, enter
192.168.1.2.
•
In the Subnet mask field, enter
•
Leave the Default gateway and DNS settings fields empty.
•
Click OK and close the dialog boxes.
Figure 1: Internet Protocol (TCP/IP) Properties
Figure 2: Internet Protocol (TCP/IP) Properties
255.255.255.0.
Advertisement
Table of Contents
Need help?
Do you have a question about the IPS-1 and is the answer not in the manual?