Seat Belt Status And Performance Checks - Still RCD15 Original Instructions Manual

4
Checks and inspections
Seat belt status and performance
checks
DANGER
For safety reasons, the condition and protective
ability of the seat belt must be checked on a daily
basis.
Do not operate the vehicle with the seat belt re-
moved.
– Check the condition of the belt: pull the seat
belt(1) all the way out of the retractor(2) and
check the seat belt for damage.
CAUTION
The seat belt must be replaced if it is cracked, worn
or has been damaged in an accident.
– Carefully check the connection between the
seat belt and the seat.
– Carefully check the connection between the
seat and the panel cover below.
NOTE
Only when the driver sits on the seat, the fork-
lift can be operated.
– Push the lever (1)on the front left-hand side
of the engine bonnet upwards with your left
hand.
– Open the bonnet and raise it around 30°.
NOTE
The bonnet is held up by the gas spring.
42


60098011601 EN - 08/2020
Use and operation