MicroBoards Technology CopyWriter Series User Manual page 10

Microboards Technology, LLC
4. Insert the hard drive tray with your source hard
drives into the Source Bay (top bay) and the hard
drive tray with your target hard drives into the
remaining bays.
a. Securely lock the trays into each
bay by sliding the tray into the bay
firmly and completely.
b. Close the latch to secure the tray.
You can lock the hard drive tray
by turning the lock knob to the
locking position as an added
precaution
drive removal during duplication.
5. Press the hard drive power buttons to turn on
each loaded bay. The LED on each button
will turn on to indicate the bay is ready.
10
against accidental