TOOLS REQUIRED: 1. Diagonal Cutters 2. Phillips #2 Drill Bit 3. Drill email - support@aampglobal.com tel - 866-931-8021...
Page 4
Locate the OEM Cargo Lamp connection that is above the headliner on the passenger side of the vehicle. Note: Easiest to access from back edge of headliner. C 936 STEP 2: Unplug the OEM Cargo Lamp connectors and install the CL-FTC harness between the two connectors. email - support@aampglobal.com tel - 866-931-8021...
Page 5
STEP 3: Install the STL40489-2 lights onto the center of the vehicle’s roof bow; leave the light connector exposed • Peel the red adhesive liners off of the STL40489-2 and stick the light in place • Use the provided 3/4” screws to secure the light to the roof rib STEP 4: Connect the appropriate P-HARRBx roof bow harness to each installed STL40489-2 light.
Page 6
STEP 5: Use the fir tree cable ties that are packaged with each P-HARRBx to secure the harness to the vehicle’s roof bow. Trim off excess cable tie material with diagonal cutters after harness is secure. (Photo below is for reference only) STEP 6: Route all P-HARRBx roof bow harnesses inside the channel that runs along the passenger/ curbside roof line...
Page 7
STEP 7: Plug all installed P-HARRBx harnesses into the mating connectors on the CL-FTC harness. STEP 8: Confirm all installed STL40489-2 lights are operational email - support@aampglobal.com tel - 866-931-8021...
Page 8
V V e e h h i i c c l l e e R R o o o o f f B B o o w w 1 1 R R o o o o f f B B o o w w 2 2 Transit Connect P-HARRB3 P-HARRB4...
Page 9
Phone – 866-766-2267 E-Mail – support@aampglobal.com EchoMaster is a Power Brand of AAMP Global EchoMaster.com...