Advertisement
Main
Sub
Contents
code
code
48
01
Main scanning/sub scanning
direction magnification ratio
adjustment
05
SPF/RSPF mode sub scanning
magnification ratio adjustment in
copying
49
01
Flash ROM program writing mode (Operating procedure)
Used to adjust the magnification ratio in the main scanning direction (front/rear) and the sub
scanning direction.
Enter the adjustment value with the 10-key and press the [START] key, and the entered value is
saved a copy is made.
(When the set value is increased by 1, the magnification ratio is increased by 0.1 %.)
(Adjustment range: 1 ~ 99, Default: 50)
Lighting lamp
TEXT lamp
Main scanning direction magnification ratio adjustment
PHOTO lamp
Sub scanning direction magnification ratio adjustment
The current SPF/RSPF mode sub scan direction magnification ratio adjustment value is displayed.
When the [START] key is pressed, the entered value is acquired and saved into the EEPROM, and a
copy is made. When the [CA] key is pressed instead, the simulation mode is terminated.
In RSPF adjustment, after the machine enters the copy mode of one page, select the single copy
mode with the duplex key to shift to the single copy mode, making two pages of single copy.
For printing, regardless of the density mode LED and the density level LED display, the density mode
= MANUAL, and density level = 3.
Lighting lamp
AE lamp
TEXT lamp
When this simulation is executed, "d" is displayed on the copy quantity display and the machine
enters the Flash ROM program writing mode. Use the writing tool on the PC to write the program.
During writing, the display is made as follows. After completion of downloading, turn OFF/ON the
power to reset.
Status
Download data reception
Data delete start
Data writing (Boot section)
Data writing (Program section)
Sum check
Completion of downloading
Error status
*
"*" in the error display indicates the error position.
1. Data reception error
2. Loader function transfer
3. Flash ROM delete
4. Flash ROM writing (Boot section)
AR-M205 SIMULATIONS 7-16
Details of operation
Adjustment mode
Adjustment mode
SPF/RSPF document surface magnification ratio adjustment
RSPF document back magnification ratio adjustment
Copy quantity display Pre-heat lamp
"d"
"d"
"d"
"d"
"d"
"OFF"
"*E"
5. Flash ROM writing (Program section)
6. Sum check (Loader section)
7. Sum check (Boot section)
8. Sum check (Program section)
Ready lamp
ON
OFF
ON
ON
Flash
OFF
Flash
Flash
ON
ON
OFF
OFF
OFF
OFF
Advertisement
