Removing the palm-rest and keyboard
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the speakers.
4. Remove the
solid-state
drive.
5. Remove the
wireless
card.
6. Remove the
I/O
board.
7. Remove the
power button
8. Remove the fan.
9. Remove the
heat
sink.
10. Remove the
coin-cell
battery.
11. Remove the
display
assembly.
12. Remove the
system
board.
13. Remove the touchpad.
Procedure
After performing the above steps, we are left with the palm-rest and keyboard assembly.
56
Removing the palm-rest and keyboard assembly
computer. After working inside your computer, follow the instructions in
or
power button with fingerprint
reader(if installed).
35
assembly
After
www.dell.com/