NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Using the alignment posts, align and place the power button on the palm-rest and keyboard assembly.
2. Replace the screws (M2x3) that secure the power button to the palm-rest and keyboard assembly.
Post-requisites
1. Replace the
I/O
board.
2. Replace the
wireless
card.
3. Replace the
solid-state
drive.
4. Replace the
base cover
Replacing the power button
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Replacing the power button
30
49