Removing the power button with fingerprint
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
Applicable only for computers that are shipped with fingerprint reader.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the
solid-state
drive.
3. Remove the
wireless
card.
4. Remove the
I/O
board.
Procedure
1. Remove the screw (M2x3) that secures the power button with fingerprint reader to the palm-rest and keyboard assembly.
2. Using a plastic scribe, release the fingerprint-reader board from the guides on the palm-rest and keyboard assembly.
3. Lift the power button with fingerprint reader, along with its cable, off the palm-rest and keyboard assembly.
50
Removing the power button with fingerprint reader
computer. After working inside your computer, follow the instructions in
31
reader
After
www.dell.com/