Table of Contents
Advertisement
7
Operating the thermostat from the mobile application
Viewing and controlling devices in different locations
7.4.3 Switching between Away and At home
7.4.4 Setting schedules
28 | 40
Operating hours widget
View heating and/or cooling operating hours of the current week, month or year.
The widget can be viewed vertically (portrait) and horizontally (landscape, auto-
rotation function of the phone/tablet is enabled). When viewed horizontally, the
widget also allows you to scroll among available pages.
NOTE: You can show/hide the trend in the chart by tapping the specific legend
atop.
You can set your thermostat to Away mode to avoid wasting energy, or to At
home mode for a comfortable room temperature.
Switch between Away and At home
●
Tap At home or Away at the bottom of any widget.
This is the default schedule:
Time periods when Comfort
Days
mode is on
6 AM – 8 AM
Monday to
Friday
5 PM – 10 PM
7 AM – 10 PM
Saturday to
Sunday
To program a different schedule, set up different time periods for the following
operating modes: Comfort, Economy and Unoccupied. For more information
about these operating modes, see Operating modes in a schedule [➙ 16].
When the schedule for one day is set, it can be copied to other days. In addition,
preset setpoints for different modes can be customized.
Initiate schedule operation
●
From the Home screen of either the local hardware unit or the mobile
application, tap
Operating mode may change if the built-in PIR sensor function is enabled and
presence is detected. See Presence detection using the built-in PIR sensor
[➙ 11] for more information.
To run the schedule without influence of the built-in PIR sensor, disable Room
presence detector under Advanced Settings > Optimization in the thermostat.
Set time periods for different operating modes
1. On the temperature control widget screen, tap
then tap Edit.
2. Select the day of the week for which you want to set a schedule. By default, the
system uses the current day.
3. On the vertical time line, tap a specific time to set a switching point. A switching
point marker displays next to the time. To fine-tune the switching point, drag
the switching point marker to the desired time.
4. Tap the switching point marker and select Comfort, Economy or Unoccupied
from the drop down list.
if
is not displayed on the screen.
Time periods when
Unoccupied mode is on
8 AM – 5 PM
10 PM – 6 AM
10 PM – 7 AM
> Thermostat schedule, and
A6V10733807_enUS_c
Advertisement
Table of Contents
