2
Getting started with the thermostat
Thermostat display overview
Idle display
8 | 40
Icon
Description
4
Tap to toggle between At home and AWAY.
5
Displays whether the thermostat is following a schedule (
following the setpoint changes permanently (
can mean the following:
●
If there is network connection and the schedule has been set, the
thermostat follows the schedule.
–
Temporary setpoint changes within a schedule last for at least
one hour. If several temporary changes occur within one hour,
the thermostat extends an additional one hour as of the last
temporary change.
–
If the next switching point is not scheduled after one hour, the
thermostat still works following the temporary setpoint change
until the next switching point is scheduled.
–
If the next switching point is scheduled within one hour, the
thermostat doesn't switch to the scheduled setpoint until the last
temporary setpoint change has lasted for one hour.
●
If there is network connection but no schedule has been set, the
thermostat follows the default schedule in the system. For more
information about the default schedule, see Setting schedules.
●
If there is no network connection or valid time, the thermostat cannot
retrieve schedule information from the Cloud. It will operate in the
Comfort mode.
6
Tap to select a fan mode (AUTO/ON).
7
Tap or slide to change the room temperature setpoint.
) or
). Following a schedule
A6V10733807_enUS_c