Cleaning And Maintenance; Charging; Using The Appliance - Kernau KVCU 100 User Manual

CHARGING

1. Please always make sure that the power supply is secure and the local voltage is consistent with the
voltage identified by the product.
2. The charger hole was in the rear of the appliance. As shown on pic, insert the charge plug pin in the
hole of the appliance.
3. You can also charge the appliance on the docking station. Please insert the charger plug pin in top hole
of docking station as pic. Twist the plug pin clock-wise till the plug turn into the frame as pic show.
Insert the cord into the gap of the docking station. Make sure the plug pin is exposed on the seat of
docking station.
4. Insert the appliance. Make sure the appliance is well seat in the position as pic show. If the appliance
can not well seat, please try again unit till well seated.
5. Plug of the charger into the power socket, the appliance is in charge.
6. When appliance is charging the power indicator light is showing a green light flashing in turn, when
the power indicator light 3 green lights is long, it means the battery is fully charged.
7. When the green power indicator light turn off, it means the power is gradually reduced, when the
power is gradually reduced to the result that the appliance can not work correctly,the last green power
indicator light is flashing, need to be charged again.
Please note the appliance can not work during charging.

USING THE APPLIANCE

1. Make sure the product is fully charged before use.
2. According to the cleaning requirements, select the appropriate accessories to install.
3. Press the switch on handle one time, the vacuum cleaner starts working, the Eco speed, the appliance
work with slow speed. Press second time. The Max speed, vacuum cleaner work with the Max speed.
You can select the speed according to your different clean surface. If need to stop working, press third
time of the switch.

4. CLEANING AND MAINTENANCE

21