Preparing For Use - Kernau KVCU 100 User Manual

Assemble spray metal tube:
• Insert the end of the spray metal tube into the main engine inlet opening, after hearing the clicks, spray
metal tube installed in place.
• If you want to remove the spray metal tube, one hand hold the spray metal tube to release button, the
other hand hold the aluminum alloy and remove the outward.
Assemble and dis-assemble the brush:
• Push the lock pin of electric floor brush to spray metal tube inlet, ensure tight without loose, after
hearing the clicks, electric floor brush installed in place.
• If you want to remove the electric floor brush, please press the electric floor brush to release button
with one hand and the other hand hold the electric floor brush and remove the outwards.
Electric floor brush and host suction inlet connection:
• Press the lock pin of electric floor brush into the inlet within the appliance, ensure tight without loose,
after hearing the clicks, electric floor brush installed in place.
• If you want to remove the electric floor brush, one hand push the lock pin of electric floor brush to
release button, the other hand hold the electric floor brush and remove the outwards
Accessories instructions:
• 2 in 1 round nozzle is suitable for cleaning the room that is small, or irregular surfaces, such as a door
frame, baseboard, keyboard etc.
• Crevice nozzle is suitable for cleaning the gap, thight surface such as corners, car seats, sofas etc
Assemble spray metal tube

3. PREPARING FOR USE

Assemble and dis-assemble
the brush
19
Electric floor brush
and host suction inlet
connection