CLEAN THE ELECTRIC FLOOR BRUSH
The Electric floor brush can be possibly block by big object or rape around by hair or long thread. It need to
be clean the rolling brush timely.
1.
Push the electric floor brush release button, remove the electric floor brush from appliance. Arbitrary
sliding electric brush to the bottom side of the rolling brush locking block, remove the rolling brush.
Clean it - see pic.
2.
After the cleanup completed, install the rolling brush inside the electric floor brush. Make sure the
rolling brush is proper seat in position. Sliding the locking block in locking position -see pic.
REPLACE THE BATTERY
If you need the a back up battery or the battery became more and more weak. You need to replace a new
battery.You can find the battery case. Press the orange button on the case. Then you can take out the battery
and replace a new one.
CLEANING
Always switch off and unplug the appliance before you clean any parts.
Do not clean any part of the vacuum cleaner in the dishwasher, if necessary clean the parts with a moist cloth.
23