Skil 9005 Original Instructions Manual page 8

material causing the wheel to climb out or kick out. The
under these conditions.
incorrect operating procedures or conditions and can be
taken.
tendency to snag the rotating accessory and cause loss
An improperly mounted wheel that projects
protected.
sparks that could ignite clothing.
may cause them to shatter.
burst.
Kickback will propel
8
CUTTING OFF OPERATIONS
breakage.
kickback may propel the spinning wheel and the power
tool directly at you.
binding.
Large workpieces tend to sag under their own weight.
Supports must be placed under the workpiece near the
wheel may cut gas or water pipes, electrical wiring or
objects that can cause kickback.
OPERATIONS
Larger sanding paper extending beyond the sanding pad
presents a laceration hazard and may cause snagging,
BRUSHING OPERATIONS
The wire bristles can easily penetrate light clothing and/
or skin.
GENERAL
16 years
The wheel may bind, walk up
The protruding
Wire wheel or brush