TECHNO-GAZ ORMA Instructions For Use Manual page 28

ENGLISH
As shown in the down figure, press to choose the adjustment function and press
to enter into the looping submenu of the adjustment function, then press to select
the five sub‐function: "Reset Remain", "Temp. Control", "Reset Time", "Working
Time", "Cancel Timing".
Reset remain:
According to the number on the coiled film or estimated value of remain, reset remain
of the film.
Press the Up key to
increase 100
Press the Down key
to decrease 100
Temperature Control:
There are 9 levels of the temperature that is from 1 to 9, and the default level is 2.
According to personal preference, the level of the temperature can be micro‐adjusted.
Press the Up key to
increase the level
of Temp.
Press the Down key
to decrease the level
of Temp.
10
Press the Next key to
choose "Adjustment"
function
Press Enter key to enter
into "Adjustment"
function
Press the Enter key
to save and back
Press Enter key to
save and back