TECHNO-GAZ ORMA Instructions For Use Manual page 23

USING THE DEVICE
The Orma machine shall be used in a clean environment without much high‐
conductivity fiber. The ambient temperature is 5°C‐40°C, and the humidity is
not more than 87%. Film used in Orma machine is made of PVC with certain
static electricity. If it is used in the location with the requirement of static
electricity, the application scope must be measured.
In order to ensure the safe usage, please strictly follow the following points:
 Before using Orma , please read this instruction carefully and follow the
operating procedure.
 Before power on, please make sure the input voltage meet the 220v‐
240v.
 In order to avoid chine failure and safety problem, it is prohibited to place
the machine in the open or flush the machine with water for cleaning.
 It is prohibited to cover bare foot with film in the machine.
 It is prohibited to put any foreign matter into the machine.
 The attention of anti‐skid shall be paid, the shoes covered by films are
prohibited to step on a place with water or watered blanket
5
ENGLISH