ENGLISH
During maintenance on the machine, it's necessary to disconnect the
power
Children are prohibited to use or play the machine.
The power supply must have reliably earthed, or it may cause serious
personal safety or equipment damage problem.
The shoe cover could be used by visitors or only in case of by hospital
operators.
The shoe cover, mustn't be used in environment or activity where there
are electrostatic charge as the same shoes that generate lead to
dangerous situations for users.
Follow instructions step by step for a correctly usage:
Connect to the power: insert both ends of wire into the indoors socket
and the machine socket repectively.
Press to open the machine.
Open the top cover on the machine, and clean up the head of coiled film
to remove burrs and other impurities affecting the installing quality to
ensure the smooth coil.
Locate the coiled film into the case of the machine horizontally.
Press the film head with one hand and push it into the film outlet
medially.
At the same time, hit
machine until the film is positionated.
Press the footboard once, the film will be automatically sent out to working
location.If need to adjust remain of the coiled film, please see:"Reset Remain".
If it does not work, press
When the coiled film is located in the working position, the machine van be
used.
Step on the position with "PRESS" mark.
When five digits on the screen are lit and a long "beep" sound is produced, the
shoe cover is shaped.
Please leave your foot from the footboard, by the time, the film will
automatically stretch out for next usage.
If necessary press to close the machine.
with another hand and send the film into the
to turn back the film and repeat the above steps.
6