Use; Attaching The Bike                                                               20 - Kayoba 639-446 Instruction Manual

GB SE
ATTACHING THE BIKE
The bike's tyres should be inflated to the maximum permitted pressure to obtain the best results
When not in use, set the resistance so there is no contact with the tyre, otherwise there is a risk of
excessive wear of the tyre
Follow the instructions below to attach the bike
1 The product is supplied assembled and folded up (fig 1)
2 Unfold the product and place it on a flat, stable surface (fig 2)
3 Loosen the quick connector on the bike's rear wheel and pull out the rear axle (fig 3)
Unscrew the end piece from the product's support axle and insert through the bike's rear
hub Replace the end piece
20

USE

Fig 1
Fig 2
Fig 3 End piece