After Sales Service - universalblue UCDH8000-20 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Please comply with your legal obligations and contribute protecting
our environment.

7. AFTER SALES SERVICE

If you have any problem with the appliance, before contacting with
the after sales Service, we recommend you to check below trouble
shooting summay table. It may help you to solve the issue easily.
Problem
The unit does not work.
Dehumidifying function is
not effective
Air does not come out of
the outlet.
The unit is too noisy.
Water leakage.
Potential cause
The
plug
connected correctly.
Water tank is full and/or
not well assembled.
Operation temperature is
too high or low.
Operation temperature or
humidity are too low.
Potential obstruction of
the air inlet or outlet.
Potential obstruction of
the filter.
The unit is not laid on a
firm and steady ground.
Potential obstruction of
the air inlet or outlet or
the filters.
Sound of wáter flowing.
The hose/pipe is not
correctly adjusted to the
drainage outlet.
The
hose/pie
obstructed.
Solution
is
not
Check
connected correctly.
Empty the water tank
and/or install it correctly
in the unit.
Use the humidifier under
temperatures
from 5ºC to 32ºC.
In
dehumidifying
might be less evident.
Check air inlet and/or
outlet are not blocked.
Check the filters and
clean them if necessary.
Check the unit is laid on a
firm and steady ground.
Check air inlet and/or
outlet are not blocked.
Also check the filters and
clean them if necessary.
Refrigerant
inside the unit. It is not a
fault.
Check the hose/pie is
correctly connected to
the drainage outlet and
adjust it if necessary.
is
Clean the debris that
might exist inside the
hose/pie.
the
plug
ranging
dry
environments,
effect
is
flowing
is
33

Advertisement

Table of Contents
loading

Table of Contents