universalblue UCDH8000-20 Instruction Manual page 28

• Setting a starting time (Timer on):
While the unit on, but on standby, press the 'Timer' button to set
a starting time. To select the starting time, press the 'Humidity
setting' button. With each press, time will increase by one hour,
being the minimum 24 hours and the maximum 24 hours. Once
set, the light indicator will flicker 5 times as confirmation. When
the programmed time arrives, the unit will start working.
AUTO DEHUMIDIFYING MODE
In this mode, the unit will work automatically to maintain the
humidity of the room in the programmed value.
contemplated:
Case 1: if the room humidity is more than 5% higher than the
programmed humidity, the unit will work to reach the programmed
humidity.
Case 2: if the room humidity is more than 5% lower than the
programmed humidity, the unit will work to reach the programmed
humidity.
Case 3: if the room humidity is in the range between the
programmed humidity minus a 5% and the programmed humidity
plus a 5%, the unit will continue working to maintain this setting.
Humidity is set at 50% by default. To change it, use the 'Humidity
setting' function as explained in point number 6.
To illustrate those 3 cases, we can take this value as an example:
Case 1: the humidity of the room is 55% or higher.
Case 2: the humidity of the room is 45% or lower.
Case 3: the humidity of the room ranges between 45% and 55%.
3 cases are
28