universalblue UCDH8000-20 Instruction Manual page 27

3. Fan: in Auto dehumidifying and cloth dry modes, press
this button to switch the fan speed between high and low.
4.
modes, it Will indicate the current relative humidity in the
room. In timer mode, it Will indicate the programmed time.
5. Humidity setting: in Auto dehumidifying mode, press this
button to set the desired humidity. Humidity range goes from
30% to 80%, increasing by 5% with every press.
6. Mode selection: when the unit is on or the timer has
been set, press this button to choose between Auto or
Continuous dehumidifying (cloth dry) modes. The lights Will
indicate the selected mode.
7. On/Off: press this button to turn the unit on and off.
SETTING THE TIMER
• Setting a shutdown time (Timer off):
When the unit is working, press 'Timer' to set a time for its
shutdown. To select the shutdown time, press 'Humidity setting'
button. With each press, time will increase by 1 hour, being the
minimum 1 hour and the maximum 24 hours. Once set, the light
indicator will flick 5 times as confirmation. When the
programmed time arrives, the unit will shut down.
Display screen: in Auto dehumidifying and cloth dry
27