universalblue UCDH8000-20 Instruction Manual page 29

Table of Contents

Advertisement

Available languages

Available languages

CLOTH DRY MODE (CONTINUOUS DEHUMIDIFYING MODE)
In this mode, the unit will be continuingly working, independently
from the humidity of the room. Fan speed can be adjusted pressing
the 'Fan' button.
INNER DRYING FUNCTION
You can use this function to dry inner cavity in your appliance. It is
specially designed for cases when the appliance is not going to be
used during a long time.
Press the "Inside drying" button f to start the drying function. Please
note the whole drying procedure will need approximately 1h.
The dehumidifier will start at high air speed and release air
continuously for 30min.
After that, the dehumidifier will run at low air speed for 15min.
To cancel this function:
• Press the "Mode selection" key for over 2 seconds to cancel
the drying function in the dehumidifier and going back to the
mode that was running before starting the inside drying.
• Press the "On/Off" key to stop the internal drying and going
back to the standby state.
DEFROST FUNCTION
The appliance has a safety system to prevent the compressor from
freezing. In this way, when low temperatures are detected in the
compressor, the display will show P1 error and the device will stop
automatically. Once the compressor warms up the appliance will
work again.
29

Advertisement

Table of Contents
loading

Table of Contents