Oil; Construction; Service Kits; Contaminated Pumps - Grundfos UNILIFT AP35B Installation And Operating Instructions Manual

6.3 Construction

The construction of the pump will appear from the
table below and fig. D in the Appendix.
Pos. Description
50 Pump housing
37a O-ring
49 Impeller
150 Motor with flange
66 Washer
84 Base
67 Lock nut
6 Inlet part
105a Shaft seal
182 Level switch

6.4 Service kits

Service kit
Shaft seal, standard
Shaft seal, FKM

Oil

6.5 Contaminated pumps

CAUTION
Biological hazard
Minor or moderate personal injury
‐
Flush the product thoroughly with clean
water and rinse the parts in water after
dismantling.
‐
Wear personal protective equipment.
The product will be classified as contaminated if it has
been used for a liquid which is injurious to health or
toxic. If you request Grundfos to service the product,
contact Grundfos with details about the pumped liquid
before returning the product for service. Otherwise,
Grundfos can refuse to accept the product for service.
Any application for service must include details about
the pumped liquid.
Clean the product in the best possible way before you
return it. Costs of returning the product are to be paid
by the customer.
14
Part number
96429307
96429308
96010646