Using The Bodypack Transmitter; Switching The Bodypack Transmitter On/Off - Sennheiser SK 2000 Manual

Using the bodypack transmitter

To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of the receiver).
2. Switch the bodypack transmitter on (see below).
The transmission link is established and the display backlighting of the
receiver changes from red to orange.

Switching the bodypack transmitter on/off

Push the two battery compartment catches
compartment cover µ.
¸
To switch the bodypack transmitter
Briefly press the
ON/OFF
The bodypack transmitter transmits an RF signal. The stan-
dard display "Frequency/Name" appears on the display panel.
The red
displayed.
To switch the bodypack transmitter off:
If necessary, deactivate the lock mode (see page 12).
Keep the
ON/OFF
the display panel.
The red
When in the operating menu, pressing the
cancel your entry (ESC function) and return you to the current
standard display.
To switch the bodypack transmitter
switch-on (offline operation):
¸
µ
on
ON/OFF
¿
ON LED lights up and the transmission icon
ON/OFF button
¿
ON LED goes off and the display panel turns off.
on
Using the bodypack transmitter
¸
and open the battery
(online operation):
button .
pressed until "OFF" appears on
ON/OFF
and to deactivate the RF signal on
¿
is
button will
11