Before Use; Unpacking; Supply - Silvercrest SDABC 1 A2 Operation And Safety Notes

Risk of product damage
Only use the specified battery type!
Insert the batteries according to the polarity marking (+) and (–)
on the battery and the product .
Clean the contacts on the battery and inside the battery
compartment before inserting!
Immediately remove drained batteries from the product .
˜ Before use
˜ Unpacking
Remove all packaging materials (including foils) . Check if all parts
are present .
NOTE: You can power the product using the included power
adaptor
[ 15 ]
˜ Connecting the power adaptor to the mains
power supply
NOTE: Before connecting the power adaptor
power supply, compare the connection information on the type
plate of the power adaptor (voltage and frequency) with the
information for your electricity supply . Make sure the information
matches to prevent product damage .
Connect the coaxial power connector of the power adaptor
with the power adaptor port
Plug the power adaptor
to connect the product to the mains .
or using batteries .
5 ] [
into a properly installed mains socket
15 ] [
[ 15 ]
.
to the mains
15 ] [
GB/IE/NI 21