Cateye STRADA CC-RD100N Quick Start Manual page 18

CATEYE STRADA
Quick Start Manual
Install the speed sensor
Install the magnet
Adjust the positions of the
speed sensor and magnet
Adjust the clearance between
the speed sensor and magnet
Fixing the wire
Winding the wire
(Installation is completed)
Adjust the clearance between the speed
sensor and magnet
Adjust the clearance between the speed sensor and
magnet so that it is within 5 mm.
When the clearance with the magnet is more than
5 mm, install the speed sensor with 1 to 3 sensor
rubber pads in layers.
Speed sensor
Return
Return to Contents
How to install the speed sensor
5 mm
Magnet
or
5 mm
Sensor rubber pad
(1 to 3 sheets)
Next