Download Print this page

Cavius 2208 Installation Manual page 3

Mains powered smoke alarm

Advertisement

If required this indication can be stopped early on
each alarm by a short press of the test button.
TIP: It is safe to cover the sound output holes with
your finger or a cloth during the testing to minimize
the sound level emitted.
If the problem continues, please visit www.cavius.com
for any trouble shooting.
8. ADD EXTRA DEVICE:
MAINS POWERED
SMOKE ALARM
SMOKE ALARM
MAINS POWERED
HEAT ALARM
The mains powered smoke alarm can be used
together with the alarms in the CAVIUS wireless
family: Smoke, Heat & mains power alarms. All
CAVIUS interconnected alarms within the
can be added to the system
as they run on same frequency and use the same
data protocol.This means that the wireless sys-
tem can consist of a combination of smoke, heat
etc.
Place all alarms into 'Learn Mode' and repeat
section 1.
Always test connection to all devices by repeating
test function section 7 after adding devices.
9.
OTHER INFORMATION:
Do not paint the alarm.
Disposal: Please dispose properly at the end of
life. This is electronic waste which should be re-
cycled.
Complies to the Radio Equipment Directive
2014/53/EU
RF frekvens: 868 MHz.
Maximum radio-frequency power transmitted: 20
dBm
Full DoC to 2014/53/EU (RED) can be download-
ed at www.cavius.com
WARNING: Please remove dust cover after
HEAT ALARM
installation. Smoke will not be able to reach the
chamber while dust cover is in place.
WARNING: All alarms should be assumed as due
to actual fire and the dwelling should be evacuat-
ed immediately.
WARNING: To prevent injury, this apparatus must
be permanently fixed to the ceiling/wall in accor-
dance with the installation instructions.
WARNING: Batteries shall not be exposed to ex-
cessive heat such as shine, fire, or the like. Note
the local country regulations regarding installa-
tion.
3
WARNING: This is a mains powered unit
and can be hazardous to install. We recommend
that the installation, together with any associated
sup-ply and interconnecting wiring, is only to be
done by a professional in accordance with BS
7671:2018.
The CE mark affixed to the product confirms
compliance with all relevant European directives
and harmonized requirements in the EN14604
standard and Construction Products Regulation
(CPR) 305/2011 along with the Radio Equipment
Directive (RED) 2014/53/EU for all wireless family
products.
22
21
1116
8504
EN 14604:2005 + AC :2008
DoP no.: 2208
The CE and RED declaration of conformity and DoP can be downloaded from: http//www.cavius.com
The paper version of the DoP is available free of charge upon request.
Declared performance 4.1-4.19 + 5.2-5.24: Passed.
All Rights reserved: CAVIUS Aps assumes no re-
sponsibility for any errors, which may appear in
this manual. Further more, CAVIUS Aps reserves
the right to alter the hardware, software, and/or
specifications detailed herein at any time without
notice, and CAVIUS Aps does not make any
commitment to update the information contained
herein. All the trademarks listed herein are owned
by their respective owners. Copyright © CAVIUS
Aps.
Developed by CAVIUS Aps, Jens Juuls Vej 28 K,
DK-8260
Manufactured in P.R.C.
Contact: CAVIUS Ltd, Edinburgh, Scotland, EH3
9DQ
uksales@cavius.com. www.cavius.com
400144 rev5

Advertisement

loading

This manual is also suitable for:

Cv 2208Cv 2106